Where Is The Diverter In A Kitchen Faucet?

Are you having trouble finding the diverter in your kitchen faucet? Don’t worry – you’re not alone. It can be tricky to pinpoint, especially if you don’t know what you’re looking for.

In this article, we’ll go over the different types of kitchen faucets and how to identify and find the diverter in each one. We’ll also discuss how to replace it if necessary.

With this knowledge, you’ll be able to find and replace your diverter with ease. So, let’s get started!

Types of Kitchen Faucets

If you’re looking to upgrade your sink setup, then you’ll want to check out the different types of faucets available!

From centerset to single-handle pull-down, there are a variety of styles to choose from.

Centerset faucets are typically mounted in a three-hole sink and come with a single handle. This type of faucet is usually the most cost-effective and offers a simple design.

A pull-down faucet offers a spray head that can be activated with the push of a button, allowing for a more powerful water flow. The single-handle pull-down faucet is a great option for those looking for a modern look as it combines the faucet and spray head into a single handle.

Whichever type of faucet you choose, you can be sure to find one that fits your sink and style.

Identifying the Diverter

Wondering where that pesky water control is? Look no further – let’s identify it!

When installing or replacing a kitchen faucet, it’s important to know where the diverter is located. The diverter is the small component located inside the faucet that controls the flow of water between the faucet and the sprayer.

It is usually located beneath the base of the faucet handle, and can be accessed by unscrewing the handle. In some cases, the diverter may be located at the base of the faucet body or even in the sprayer hose.

If you can’t find the diverter in any of these locations, you may need to contact the manufacturer for help. To remove the diverter, use a pair of pliers or a small screwdriver to unscrew it from the faucet body.

Once the diverter is removed, you can inspect it for any signs of damage, such as cracks or breaks. If the diverter is damaged, it should be replaced with a new one.

Finding the Diverter in a Single Handle Faucet

Finding the water control in a single-handle faucet can be tricky – let’s locate it together! The diverter is usually located on the side of the faucet or on the base of the spout. It’s often a small knob that can be pulled up or pushed down to control the water flow.

To replace or maintain the diverter, it’s important to first identify where it is located. To do this, you can use a flashlight to look inside the faucet spout. If you can’t locate the diverter, you may need to remove the faucet handle to access the internal parts.

Once the handle is removed, you should be able to locate the diverter and replace or maintain it as needed.

Finding the Diverter in a Two Handle Faucet

Searching for the water control in a two-handle faucet can be overwhelming – but did you know that two-handle faucets are the most common type of sink faucet found in American homes?

Typically, the diverter is located between the two handles. It looks like a small cap or plug that is attached to a small tube.

Here are 3 steps to find your diverter:

  1. Check the center of the faucet between the two handles.
  2. If the diverter isn’t visible, look for a small hole on the side of the handle.
  3. If you still can’t find it, use a flashlight and look up inside the faucet.

When you’ve located the diverter, you can then start the process of installing or cleaning it as needed.

To install a new diverter, you’ll need to unscrew it from the faucet and replace it with a new one.

To clean the diverter, you’ll need to take it apart to get to the inner parts. You may need to use a brush or other tools to clean the inner parts.

Once you’ve cleaned it, you can reassemble the diverter and install it back into the faucet.

Finding the Diverter in a Pull-Out Faucet

Struggling to locate the water control in your pull-out sink? Don’t worry, it’s a common issue! If you’re having difficulty finding the diverter in your pull-out kitchen faucet, here’s a few tips to help you find it.

First, it’s important to understand that the diverter is usually located behind the handle of the faucet. To access it, you may need to remove the handle by unscrewing it with a Phillips head screwdriver. Once the handle is off, you should be able to see the diverter.

Task Recommended Tools
Installing Diverters Phillips Head Screwdriver
Cleaning Diverters Pliers, Wrench

If it is still difficult to access or if the diverter is stuck, you may need to use a wrench or pliers to remove it. It’s important to be gentle and to take your time when doing this, as you don’t want to damage the faucet. Once you have the diverter removed, you can clean it and reinstall it.

If you need help installing or cleaning the diverter, it’s best to consult a professional plumber. They can help you make sure that your faucet is properly maintained and functioning correctly.

Finding the Diverter in a Wall-Mount Faucet

Locating the water control in a wall-mount sink can be tricky, but it can be done with the right tools and a bit of patience! For example, one homeowner was able to find the diverter behind their sink’s handle by unscrewing it with a Phillips head screwdriver.

The process of installing a wall-mount faucet and replacing a diverter requires careful consideration. Measurements must be taken to ensure that the faucet is centered and that the diverter is placed at an appropriate height. Once the measurements are taken, the diverter can be installed.

The diverter should be mounted securely in the wall and the necessary connections must be made to the water supply lines. Finally, the handle can be attached and the faucet can be tested for proper operation.

With the right tools and a little patience, anyone can install a wall-mount faucet and replace the diverter.

Finding the Diverter in a Pot Filler Faucet

Trying to find the water control in a pot filler faucet can be tricky, but it’s totally doable with the right tools and a bit of patience!

To begin, make sure to turn off the water before attempting to install the diverter. This is an important step and should not be skipped!

Once you have the water turned off, you need to locate the diverter. This is typically located underneath the faucet, so you will need to remove the faucet to gain access to it.

Common problems you may encounter include a worn out diverter, a clogged diverter, or a broken diverter. If you are having trouble locating the diverter, consult the pot filler faucet’s user manual or contact the manufacturer for assistance.

After you have located the diverter, you can replace it with a new one and then reattach the faucet. And that’s it! You have successfully found and installed the diverter in your pot filler faucet.

Frequently Asked Questions

What is the purpose of the diverter in a kitchen faucet?

Installing and maintaining a diverter in your kitchen faucet can be a simple process. The diverter is designed to direct water flow between your faucet and any other device connected to it, like a sprayer or hose.

But before installing your diverter, you should make sure that it’s compatible with your faucet. Once installed and properly sealed, the diverter will help maintain maximum water pressure and keep your kitchen faucet running smoothly for years to come.

How do I know if my kitchen faucet has a diverter?

Figuratively speaking, it’s like looking for a needle in a haystack if you’re trying to find the diverter in your kitchen faucet. However, there are some tell-tale signs that can help you figure out if you have a diverter or not.

Installing a diverter on your faucet depends on the type of faucet you have, as some are designed to have a diverter and some are not. If you have a single-handle faucet, for example, it may have a pull-down spray nozzle that includes a diverter.

You can also check to see if there is a switch on the side of the faucet’s spout, as this could indicate that it has a diverter.

How do I determine the size of my diverter?

To determine the size of your diverter, you’ll need to take some measurements. The most accurate way to measure is to use a ruler or caliper.

When measuring, make sure to account for any grooves or ridges that might affect the part selection. You can also use a measuring tape, but be sure to double-check the measurements for accuracy.

Once you’ve taken your measurements, use them to select the correct size diverter for your kitchen faucet.

Are there any specific tools needed to replace a diverter?

Replacing your kitchen faucet’s diverter might seem intimidating, but with the right tools, it doesn’t have to be.

Firstly, you’ll need a pair of adjustable pliers and a screwdriver. Depending on the model of your faucet, you might need a basin wrench as well.

Before attempting to replace the diverter, make sure you turn off the water supply to avoid any potential leaking issues.

Once you have the right tools and the water supply is turned off, you can begin the installation steps.

First, loosen the nuts that are holding the faucet together. Then, remove the existing diverter and replace it with the new one.

Finally, tighten the nuts and test it out to make sure that it works correctly.

With the proper tools and step-by-step instructions, replacing your kitchen faucet’s diverter is a quick and easy task.

Is there a difference between a diverter for a kitchen faucet and a bath faucet?

When it comes to diverters for your kitchen and bathroom faucets, there are differences to consider.

A diverter for the kitchen faucet typically controls the water flow, sending it to the sprayer or back to the faucet.

A diverter for the bath faucet, on the other hand, usually offers stress relief by allowing you to switch between a gentle spray and a more powerful stream.

It’s important to get the right diverter for the right faucet, so make sure to check the specifications before you purchase.


Knowing where to find the diverter in your kitchen faucet is key to ensuring it’s properly maintained.

Whether it’s a single handle, two handle, pull-out, wall-mount, or pot filler faucet, the diverter’s position can vary.

By exploring each type with patience and precision, you’ll be able to pinpoint its proper place.

Practically pinpointing the diverter’s placement allows you to properly care for your kitchen faucet and keep it functioning for years to come.

Don’t delay, discover the diverter’s dwelling today!

Leave a Comment