How To Remove Kitchen Faucet Handle Without Screws

Removing a kitchen faucet handle without screws may sound like a complicated task, but it’s actually pretty easy! You don’t need a lot of tools either – just some pliers.

With these simple steps, you’ll have your faucet handle off and replaced in no time. So let’s get started and learn how to remove a kitchen faucet handle without screws!

Removing the faucet handle doesn’t require a lot of experience. All you need is the right tools and a little bit of patience. You’ll need a pair of pliers and maybe a flashlight.

Once you have those, you can locate the retaining clip and use the pliers to remove it. Then, you can lift the handle off, remove the retaining nut, and unscrew the faucet cartridge.

After that, you can install the new faucet handle and you’ll be all done!

Gather the Required Tools

To successfully complete this task, you’ll need the right tools; so, gather them together and make sure you have everything you need.

Start by cleaning the surfaces of the faucet to remove any dirt and debris, then identify the parts of the handle.

You’ll need a flathead screwdriver, a pair of needle-nose pliers, and a basin wrench. Having these tools on hand will make it easier to remove the handle without having to search for them once the job is underway.

Locate the Retaining Clip

You’ll need to find the retaining clip; it’ll hold the faucet in place. Start by investigating the area around the faucet handle.

Look for a small screw or a small metal clip that is holding the handle in place. If you can’t find a screw, the handle is probably held in place by a retaining clip. The clip may be located near the top of the handle, near the base of the handle, or on the side.

Once you locate the clip, you’ll need to identify the solution for removing it. Most likely, you’ll need to use a pair of needle-nose pliers to remove the clip. You may also need a flat-head screwdriver to pry the clip off.

If the clip is too tight to remove, you can try soaking it in white vinegar for 10 minutes. This will help to loosen it. Then, you can use the pliers to remove it.

Once the clip is removed, the handle should come off easily.

Use Pliers to Remove the Clip

Once you’ve identified the clip, grasp it firmly with your pliers and give it a gentle tug to free it from its hold.

Replacing clips can be a difficult task, but with a set of pliers, you’ll be able to easily remove the clip that’s securing your kitchen faucet handle. Be sure to use caution when pulling the clip out.

If the clip is stuck in place, use a bit of force to remove it, but be careful not to damage the handle.

Once the clip has been removed, you can now remove the handle and replace it with a new one.

Lift Off the Handle

Grasp the handle firmly and give it a gentle tug to lift it off the faucet.

If the handle does not come off easily, use a flathead screwdriver to gently pry it open. You may have to loosen the bolts or screws that hold the handle in place before you can lift it off.

If the handle is stuck, use a pair of pliers to firmly grip the handle and twist it back and forth until it breaks free. Be sure to use caution when prying and twisting the handle to avoid damaging the faucet.

Once the handle is free, you can easily lift it off the faucet and remove it.

Remove the Retaining Nut

Carefully twist the retaining nut counter-clockwise until it loosens and can be fully removed. Before doing so, it’s important to determine the size of the nut and any bolts that may be attached to it. This can be done by using a wrench or pliers.

Once the size of the nut has been determined, you can easily lift off the handle. To make sure the handle is properly removed, it’s important to check for any remaining bolts or other components that may still be attached.

To do this, take a look around the area where the handle was and ensure that all components are removed. The components can be safely disposed of, or saved for future use.

Check the size of the nut.

Loosen and remove the nut.

Lift off the handle.

Check for any remaining bolts.

Unscrew the Faucet Cartridge

Gently twist the cartridge counterclockwise until it comes loose. To prevent any further damage, it’s important to use a flathead screwdriver and channel locks to turn the cartridge. Make sure to keep a firm grip while unscrewing the cartridge to avoid damaging the faucet.

If you are having trouble unscrewing the cartridge, it’s best to seek professional help or try troubleshooting tips to make the job easier.

Once the cartridge has been unscrewed, it’s important to perform preventative maintenance on the faucet to ensure that it’s functioning properly. Check for any leaks and make sure the cartridge is completely dry. If you notice any signs of damage, such as a broken seal, then it’s best to replace the cartridge altogether.

Doing regular preventative maintenance will help keep the faucet in good condition for a longer period of time.

Install the New Faucet Handle

Securely hold the new handle in place and give it a good twist to make sure it’s firmly secured – it’s the perfect finishing touch to your beautiful kitchen!

Installing a new kitchen faucet handle is a simple process, as long as you have the right replacement parts. Start by lining up the mounting holes in the new handle with the existing holes in the faucet. You may need to adjust the distance of the handle from the wall in order to make it fit.

Once the handle is lined up, place the mounting nuts over the screws and then screw them in place. Make sure to use the right tools and follow installing tips to ensure that the handle is securely fastened.

Finally, give the handle a good twist and test it out to make sure it’s secured properly. With the new handle in place, you can now enjoy your new and improved kitchen faucet!

Frequently Asked Questions

What should I do if I have difficulty locating the retaining clip?

If you’re having trouble locating the retaining clip on your kitchen faucet handle, don’t worry.

It can be difficult to access, especially if you don’t have the right tools.

If you don’t have a special tool, you can use a small flathead or Phillips head screwdriver to pry the clip out of place.

Be sure to be gentle, as you don’t want to damage the clip or the handle.

What kind of tools do I need for this process?

You’ll need a few tools to remove your kitchen faucet handle without screws.

First, you’ll need a flathead screwdriver.

You’ll also need a pair of pliers and a waterproofing sealant.

Depending on the type of faucet handle you have, you may need additional tools, such as an Allen wrench or Phillips head screwdriver.

Once you have the right tools, you can identify the types of retaining clips the handle may have and use the screwdriver to remove them.

How do I know if my faucet cartridge needs to be replaced?

If you’re not sure if your faucet cartridge needs to be replaced, look for signs and symptoms that indicate it’s time for a replacement.

Common signs include a dripping faucet, a handle that’s hard to turn, or a faucet that only produces a weak stream of water.

The type of faucet you have can also help you determine if your cartridge needs to be replaced. For example, if you have a compression faucet, you’ll likely need to replace the cartridge if the handle is hard to turn.

If you have a cartridge faucet, you’ll probably need to replace the cartridge if your faucet is leaking.

Is it necessary to use pliers to remove the clip?

You may need to use pliers to remove a stuck or corroded clip.

If the clip is stuck, try to gently pry it off with some pliers. Be careful not to damage the clip or the surrounding area.

If the clip is corroded, use a lubricant to help loosen it, then use the pliers to remove it.

It’s important to use pliers to remove the clip, since it’s unlikely that you’ll be able to remove it with your hands.

How do I make sure the new faucet handle is properly installed?

When installing a new faucet handle, it’s important to take a few safety measures to ensure a secure fit.

Make sure to check the seals of the new handle to make sure they are properly aligned and secure.

Use a wrench to tighten the nuts and bolts of the handle to the faucet and check that the handle is securely fastened.

Finally, it’s a good idea to test the handle before using the faucet to make sure it’s properly installed and functioning correctly.


Great job! You’ve successfully removed your kitchen faucet handle without screws.

Now it’s time to install the new handle. Make sure you have the right tools and supplies, as well as the instructions that come with your new handle.

Once you’ve got everything ready, start by removing the retaining nut. Then, unscrew the faucet cartridge and install the new handle.

You’re all done! Now you can enjoy the convenience of a new kitchen faucet handle. Congratulations on a job well done.

Leave a Comment